- FREE SHIPPING ON ORDERS over £250*
- hello@smartfishing.uk
Showing 25–36 of 48 results
-
Railblaza C-TUG Inner Tube
£15.60Suits Older C-Tug pnematic wheels
Sold individually
Max 30PSI Inner Tube suitable for the older pneumatic C-TUG wheels.
-
Railblaza C-TUG Hull Pad
£16.61UV stablilised fibreglass reinforced PP plastic
UV stabilised santoprene elastomer
Compatible with all C-Tug Carts
Sold individually (2 hull pads are used in the assembly of a C-Tug cart)
The C-Tug Replacement Hull Pad is a single piece replacement hull pad platform for the C-Tug Kayak and Canoe Cart compatible with all C-Tug models using the integrated snap and lock technology.
-
Railblaza C-TUG Double Up Bar and Straps
£29.90Easily disassembled
Supplied with 2 x extended straps
Carry weights up to 160kg (350lbs) static loading
Works with C-Tug and C-Tug SandTrakz I
deal for heavy kayaks, dinghies & inflatable boats
The Double Up Bar allows you to assemble 2 x C-Tugs together, spreading the load and allowing you to carry heavier kayaks or boats.
The bar is a specific length to keep the wheels close together allowing the double cart to be turned easily.
Once loaded and balanced no lifting is required, all you have to do is pull it. Works with the standard C-Tug & C-Tug SandTrakz. Fits any C-Tug old or new.
-
Railblaza C-TUG Dinghy Wheels Pair
£99.79Made in New Zealand
Easy installation & assembly
Lightweight & effective 10 inch puncture free wheels
Fibreglass reinforced UV resistant plastic
Wheels easily removed when stowing dinghy
Easy lock and unlock feature
Multiple wheel positions
C-TUG Dinghy Wheels are a lightweight and rugged option for transporting your dinghy up the beach, or down the boat ramp, avoiding having to carry the heavy load. Ideally suited for inflatable boat tenders or small lightweight aluminium boats.
-
Railblaza C-TUG Dinghy Wheel Bush Set
£8.28UV stabilised acetal plastic
4 replacement wheel bushes
The C-Tug Replacement Dinghy Wheels Bush Set is a set of replacement pieces compatible with the C-Tug Dinghy Wheels for replacing the inner grey spacer on the wheels.
As a set of four, the C-Tug Replacement Dinghy Wheel Bush Set comes with enough pieces to re-fit one pair of Dinghy Wheels.
-
Railblaza C-TUG Cross Beam
£26.59Cross Beam – UV stabilised ABS plastic Toggle Lock – UV stabilised acetal plastic
Axle & Pin – stainless steel
Sold individually (2 crossbeams are used in the assembly of a C-Tug cart)
The C-Tug replacement cross beam is a single part which will do one side of the C-Tug.
Supplied with toggle lock included.
Please note: 2 crossbeams are used in the assembly of a C-Tug.
-
Railblaza Bimini RailMount i360 Light Kit
£69.84Rubber inserts avoid slippage when attached to bimini
Illuminate i360 is waterproof up to 1m has 3 modes – low, full & flashing
Powered by 3 x AA batteries, not supplied
UV stabilised plastic
Unique design avoids interference with bimini fabric
Unique design avoids interference with Bimini material
A battery-powered removable/emergency nav light with no wires. The RAILBLAZA Bimini RailMount Light Kit adds a navigation light to any round or square tube bimini using only a screwdriver.
The Bimini RailMount Light Kit will secure the battery powered Illuminate i360 all-round white navigation light at the height of the bimini or canopy.
When not needed for the navigation light the Bimini RailMount is ideal for other light weight RAILBLAZA accessories like the Camera Mount Kit and more! T
he Bimini RailMount is simply screwed together with no drilling required so that it can be easily removed, leaving your bimini as good as new!
The Bimini RailMount can be fitted to square rails 28mm (1 1/8”) or 32mm (1 ¼”) and round rails 19mm (3/4”), 22mm (7/8”), or 25mm (1”). All installation hardware is provided including rubber inserts and the required stainless-steel mounting screws.
-
Railblaza Bimini RailMount
£24.08Rubber inserts avoid slippage when attached to Bimini
StarPort locking slide secures accessories in place
UV stabilised plastic
Unique design avoids interference with Bimini material
The RAILBLAZA Bimini RailMount is a base mount that allows secure and easy attachment of lightweight RAILBLAZA products to your round or square tube Bimini.
This mount will secure accessories at the height of the Bimini, ideal for navigation lights, flash/flood lights, action cameras, and much more!
The Bimini RailMount is simply screwed together with no drilling required so that it can be easily removed, leaving your Bimini as good as new!
The Bimini RailMount can be fitted to square rails 28mm (1 1/8”) or 32mm (1 ¼”) and round rails 19mm (3/4”), 22mm (7/8”), or 25mm (1”).
All installation hardware is provided including rubber inserts and the required stainless-steel mounting screws.
-
Railblaza Adjustable Platform
£16.61180 degrees tilt
RAILBLAZA Platforms will fit into any RAILBLAZA mount, or many sailboat winch handle receivers. The Platform can be used as a flat surface to make many items StarPort compatible, meaning these items can all be plugged in and locked in place on your inflatable, kayak, sailboat or any other place that will take a StarPort. The platform comes with pre-moulded screw holes, or more holes can easily be drilled, it allows you to tilt items 180 degrees, in 15 degree increments.
Once you have finished using the platform it can be removed and the StarPort can be retasked for another application.
In The Box 1 x Adjustable Platform 1 x surface mount collar 1 x weather-tight gasket & cover 2 x 12-gauge 32 mm self-tapping screws 2 x M6 x 35mm machine screws, washers & nuts
-
Railblaza Adjustable Extender R-Lock
£20.75R-Lock friction joint Knuckle joint with 15° increments
UV Stabilised engineering plastics
Stainless steel fasteners With two rotating R-Lock friction joints and a knuckle joint that tilts in 15° increments, the Adjustable Extender R-Lock adds great versatility.
When coupled with one of RAILBLAZA’s large range of accessories, it helps keep hold of your Fillet Table, fish finder, or any number of useful items.
When coupled with one of RAILBLAZA’s large range of accessories, the Extender is a great addition to help keep hold of your emergency torch or fishfinder, or any number of useful items.
NOTE: Extenders increase the force applied to a StarPort, they are not designed to have heavy loads applied. Extenders must not be used with a rod holder for trolling.
-
Railblaza Adhesive Handle – White
£15.76Colour: White
Attached using two pot inflatable boat glue (not included)
Low profile design for mininal protrusion
Dimensions: 240 x 100mm (9 11/25” x 3 9/10”)
Stylish and comfortable hand holds for inflatable boats complimenting the fit and finish of RAILBLAZA adhesive mounts.
-
Railblaza Adhesive Handle – Grey
£15.76Colour: Grey
Attached using two pot inflatable boat glue (not included)
Low profile design for mininal protrusion
Dimensions: 240 x 100mm (9 11/25” x 3 9/10”)
Stylish and comfortable hand holds for inflatable boats complimenting the fit and finish of RAILBLAZA adhesive mounts.
